Your benefits
- Powerful dynamics
High travel speeds and optimum positioning allow the achievement of powerful dynamics. - Simplified project planning
No need to check the ratio between the motor’s moment and the external moment of inertia. - Reduced maintenance
Wear parts such as spindles, ball bearings, and toothed belts are no longer required. - Reduced noise levels
Less noise produced, even with high supply voltages.
Features
- No mechanical transmission components or wear parts are required as linear motion and force are generated directly
- Optimized force-density ratio thanks to the latest winding technology and laminated iron core
- Virtually maintenance-free
- High control quality, dynamics, and accuracy
- Available in three designs: SL2 Basic, SL2 Advance System, SL2 Power System
- Secondaries available in three different lengths; can be lined up easily
SL2 Basic
SL2 Basic: Primary and secondaries
- Width: 25, 50, 100, 150, 200, and 250 mm
- Rated speeds: 1, 3, and 6 m/s
- 4 motor lengths: VS, S, M, and ML
- 4 secondary lengths: 64, 128, 256, 512 mm
- Rated thrusts of 125 N to 6,000 N
- Peak feed thrusts of 330 N to 12,600 N
- IP65
SL2 Advance System
Basic components integrated into cooling units
- Width: 50 mm to 150 mm
- Rated speeds: 1, 3, and 6 m/s
- 4 motor lengths VS, S, M, and ML
- 4 secondary lengths: 64, 128, 256, 512 mm
- Rated thrusts of 280 N to 3,600 N
- Peak feed thrusts of 650 N to 7,700 N
- IP65
SL2 Power System
SL2 Advance with additional fan
- Width: 50 mm to 150 mm
- Rated speeds: 1, 3, and 6 m/s
- 4 motor lengths VS, S, M, and ML
- 4 secondary lengths: 64, 128, 256, 512 mm
- Rated thrusts of 400 N to 5,500 N
- Peak feed thrusts of 650 N to 7,700 N
- IP54
Options
Options for SL2 Advance System and SL2 Power System
- Design on the motor end with appropriate plug connectors
- EMC-compliant connector housing design
- Strain relief ensured by connectors with lamellar seal (cable end) in accordance with EN 61884
- Comprehensive range of accessories for inverter-specific assembly