Your benefits
- Long service life
The patented oil bath lubrication means that the linear unit is maintenance-free and reduces wear to a minimum. - High power density
The thermally conductive oil bath enhances the temperature compensation between the heat source and the heat dissipating component parts. - Fast acceleration
The permanent magnet rotors ensure a power increase that is five times faster than pneumatic cylinders. - Reduced costs
Energy provision not necessary which thus saves energy costs. What’s more, the compact design reduces the production area.
Electric cylinder standard CMS..
Properties
CMSB50 – 71 series with oil bath lubrication
- Patented maintenance-free oil bath lubrication (lubrication for life)
- Very high thermal power density
- Very low-noise operation
- Very small working strokes possible (< 1 mm)
- Integrated ball screw drive or planetary roller screw drive
- Smooth, hard chrome-plated piston rod for special requirements at certain ambient conditions, such as in humid or dusty environments
- Integrated locking device for lifting rod (torque arm)
- Also available as brake servomotor with 24 V holding brake
- Resolver feedback or with absolute encoder
- Optional 24 V forced cooling fan
- Food grade lubricant as an option
- Integrated water cooling
- Various installation options
CMS71 series with grease lubrication
Tehnical Data
CMSB50 – 71 series with oil bath lubrication
CMSB50
Electrical data | |||||
---|---|---|---|---|---|
Type | CMSB50S | CMSB50M | CMSB50L | ||
Max. torque Nm |
5.2 | 7 1) | 7 1) | ||
Standstill torque Nm |
1.3 | 2.4 | 3.3 | ||
Mechanical data | |||||
Rated speed nN |
3,000 rpm 4,500 rpm 6,000 rpm |
||||
Spindle type | KGT 2) 20×5 | KGT 2) 20×5 | KGT 2) 20×5 | ||
Max. continuous feed force 4) N |
1,200 | 2,200 | 2,200 | ||
Peak feed force N |
5,300 | 8,000 | 8,000 | ||
Stroke lengths mm |
70 / 100 / 150 / 200 / 300 / 400 /600 | ||||
Max. speed mm/s | 375 | 375 | 375 |
CMSB63
Electrical data | ||||
---|---|---|---|---|
Type | CMSB63S | CMSB63M | ||
Max. torque Nm |
11.1 | 11.1 1) | ||
Standstill torque Nm |
2.9 | 5.3 | ||
Mechanical data | ||||
Rated speed nN |
3,000 rpm 4,500 rpm 6,000 rpm |
|||
Spindle type | KGT 2) 25×6 | KGT 2) 25×6 | ||
Max. continuous feed force 4) N |
2,400 | 4,100 | ||
Peak feed force N |
10,000 | |||
Stroke lengths mm |
60 / 100 / 160 / 180 / 200 / 400 / 600 | |||
Max. velocity mm/s |
450 |
CMSB71
Electrical data | |||
---|---|---|---|
Type | CMSB71S | CMSB71M | CMSB71L |
Max. torque Nm |
19.2 | 25 4) | 25 4) |
Standstill torque Nm |
6.4 | 9.4 | 13.1 |
Mechanical data | |||
Rated speed nN |
2,000 rpm 3,000 rpm 4,500 rpm 6,000 rpm |
||
Spindle type | KGT 2) 32×6 | KGT 2) 32×6 | KGT 2) 32×6 |
Max. continuous feed force 4) N |
5,000 | 7,500 | 10,000 |
Peak feed force N |
18,000 | 24,000 | 24,000 |
Stroke lengths mm |
100 / 160 / 200 / 400 / 600 / 800 / 1,000 / 1,200 | ||
Max. velocity mm/s |
450 | 450 | 450 |
CMS71 series with grease lubrication
Electrical data | ||||
---|---|---|---|---|
Type | CMS71L | |||
Max. torque Nm |
31.4 | 22.1 1) | 24.4 1) | |
Standstill torque Nm |
9.5 | |||
Mechanical data | ||||
Rated speed nN |
2,000 rpm 3,000 rpm 4,500 rpm |
|||
Spindle type | KGT2) 32×10 | KGT2) 32×6 | PGT3) 24×5 | |
Max. continuous feed force 4) N |
3,600 | 6,700 | 7,200 | |
Peak feed force N |
17,000 | 20,000 | 15,000 20,000 5) |
20,000 |
Stroke lengths mm |
200 | 200 | 350 | 200 |
Max. velocity mm/s |
500 | 300 | 200 | 250 |
|
Modular electric cylinder CMSM.. – axially serial and parallel configuration
Properties
CMSMB50 – 71 series / ACH or ACA (axially serial)
- Can be combined with our standard servomotors (CMP50/63/71) using ACH/ACA adapters
- Separately available modular unit (linear gear unit) with maintenance-free oil bath lubrication of the standard electric cylinder
- Increased thermal utilization
- Homogeneous heating
- Maintenance-free thanks to lubrication for life
CMSMB50 – 71 series / AP (axially parallel)
Tehnical Data
CMSMB50 – 71 series / ACH or ACA (axially serial)
Type | CMSMB50/ACH or ACA | CMSMB63/ACH or ACA | CMSMB71/ACH or ACA | |
---|---|---|---|---|
Max. permitted input torque Nm |
7 | 11.1 | 25 | |
Max. permitted input speed rpm |
4,500 | 4,500 | 4,500 | |
Peak feed force N |
8,000 | 10,000 | 24,000 | |
Stroke lengths mm |
70 / 100 / 150 / 200 / 300 / 400 / 600 | 60 / 100 / 160 / 180 / 200 / 400 / 600 | 100 / 160 / 200 / 400 / 600 / 800 / 1,000 / 1,200 | |
Spindle type | KGT 1) 20×5 | KGT 1) 25×6 | KGT 1) 32×6 |
CMSMB50 – 71 series / AP (axially parallel)
CMSMB50/AP
Electrical data | |||
---|---|---|---|
Type | CMSMB50/AP and | ||
CMP50S | CMP50M | CMP50L | |
Max. torque Nm |
5.2 | 7 1) | 7 1) |
Standstill torque Nm |
1.3 | 2.4 | 3.3 |
Mechanical data | |||
Rated speed nN |
3,000 rpm 4,500 rpm 6,000 rpm |
||
Spindle type | KGT 2) 20×5 | ||
Max. continuous feed force N |
1,200 | 2,200 | 2,200 |
Peak feed force N |
5,300 | 8,000 | 8,000 |
Stroke lengths mm |
70 / 100 / 150 / 200 / 300 / 400 / 600 | ||
Max. velocity mm/s |
375 | 375 | 375 |
CMSMB63/AP
Electrical data | |||
---|---|---|---|
Type | CMSMB63/AP and | ||
CMP63S | CMP63M | CMP63L | |
Max. torque Nm |
11.1 | 11.1 1) | 11.1 1) |
Standstill torque Nm |
2.9 | 5.3 | 7.1 |
Mechanical data | |||
Rated speed nN |
3,000 rpm 4,500 rpm 6,000 rpm |
||
Spindle type | KGT 2) 25×6 | ||
Max. continuous feed force N |
2,400 | 3,600 | 4,800 |
Peak feed force N |
10,000 | 10,000 | 10,000 |
Stroke lengths mm |
60 / 100 / 160 / 180 / 200 / 400 / 600 | ||
Max. velocity mm/s |
450 | 450 | 450 |
CMSMB71/AP
Electrical data | |||
---|---|---|---|
Type | CMSMB71/AP and | ||
CMP71S | CMP71M | CMP71L | |
Max. torque Nm |
19.2 | 25 1) | 25 1) |
Standstill torque N |
6.4 | 9.4 | 13.1 |
Mechanical data | |||
Rated speed nN |
2,000 rpm 3,000 rpm 4,500 rpm 6,000 rpm |
||
Spindle type | KGT 2) 32×6 | ||
Max. continuous feed force N |
5,000 | 7,500 | 10,000 |
Peak feed force N |
18,000 | 24,000 | 24,000 |
Stroke lengths mm |
100 / 160 / 200 / 400 / 600 / 800 / 1,000 / 1,200 | ||
Max. velocity mm/s |
450 | 450 | 450 |
|